Welcome to We Accessory! DMCA.com Protection Status

Custom Phone Case Wholesale - OEM Logo, Private Label and Retail Packaging

 

This page is for buyers who need their own phone case rather than a stock design off a shelf: their logo, their colour, their packaging. Stock case orders ship from 50 pcs. Anything printed, colour-matched or boxed with your brand starts at 1,000 pcs per design. We hold the moulds in our own workshop, so your artwork never leaves our floor for a third party to print.

 

Most enquiries come from two kinds of buyer. Retailers who already sell cases and want to move from someone else's brand to their own. And online sellers testing a private label before committing to volume. Both ask the same four questions: what can be changed, what the real minimum is, how long it takes, and what it costs. Below is the straight answer to each, including the parts that are inconvenient.

 

What you can change

 

Four things are quoted separately, because they carry different minimums and different setup costs. Mixing them into one price hides where the money actually goes, which is how buyers end up with a quote they cannot compare against anyone else's.

 

Material. TPU, PC, TPU+PC two-in-one, liquid silicone, clear acrylic, PU leather-look, and MagSafe-compatible shells with the magnet ring moulded in rather than glued on. TPU is the cheapest and the most forgiving on fit. PC gives a harder shell and sharper print definition. The two-in-one is what most retail chains pick, because the soft inner liner absorbs shock while the hard outer shell holds its shape in the packaging.

 

Colour. Solid silicone and TPU can be matched to any Pantone reference. Clear and PC are limited to transparent, black, white and tinted. A polycarbonate shell cannot be dyed to a light colour reliably, and we will say so rather than take the order and ship something that arrives two shades off your brand guide.

 

Printing. Silk screen for one to four flat colours, UV full colour for photographic artwork, heat transfer for full-wrap edge-to-edge designs, laser engraving on PU leather and PC, 3D embossed logo for a raised mark, plus glitter and metallic foil finishes. Silk screen works out cheapest per unit once you are above 1,000 pcs. UV carries no per-colour setup, so it wins on artwork with more than four colours.

 

Packaging. Poly bag, OPP bag with a printed header card, printed retail box, blister with insert card, or kraft box. If you already have a dieline, send it and we will check it against the case dimensions before printing. If you do not, we supply a template for the box size that fits your model count.

 

Minimum order and where the price breaks

 

Three numbers, and they do not move:

 

Order type

 

Minimum

 

Stock designs, mixed models

 

50 pcs

 

Custom logo, custom colour or custom packaging

 

1,000 pcs per design

 

Volume price break

 

Starts at 1,000 pcs

 

The 1,000 pcs is not a negotiating position. Below that, the screen or plate setup is spread over too few units and the setup cost per case ends up higher than the case itself. We would rather tell you that on day one than quote 500 pcs at a unit price you later discover was propped up by a hidden tooling charge.

 

The 1,000 pcs does not have to be one model. Splitting it across a model mix is normal, and we will tell you the split that keeps the printing economical — usually no more than four or five models per print run, because each model is a separate pass.

 

On stock designs the 50 pcs can be spread across as many models as you like. That is the part of the business aimed at shops that need depth on the fastest movers without tying up cash on a full model run.

 

Sampling and lead times

 

A stock sample ships in 2 to 4 working days. A custom logo sample takes 5 to 7 days after you approve the artwork, and the sample fee is credited against the bulk order. If your design needs a new mould, allow 20 to 25 days for tooling before sampling starts.

 

Production after sample approval runs 10 to 20 working days depending on the print method and how many models are in the run. Silk screen with four or five models sits at the longer end. UV on a single model is closer to ten. We give the date on the proforma invoice and we do not move it afterwards without telling you why.

 

Artwork we need before we can quote

 

Four files, and the quote is usually back the same working day:

 

A vector file — AI, EPS or PDF. A 300 dpi PNG works for UV, but not for silk screen separations.

 

The Pantone number, if the colour has to match a brand guide.

 

Your model list, with the quantity split across models.

 

A packaging dieline if you have one. If not, say so and we will send a template.

 

 

 

Low-resolution screenshots are the single most common cause of a delayed custom order. We can rebuild a logo from a screenshot, but the edge quality will not match a vector, and we would rather ask you for the file than ship a printed logo with a soft edge.

 

Six checks before anything is boxed

 

1. Incoming material — durometer and sheet thickness measured against the spec for that model.

2. Moulding — wall thickness and camera cut-out position checked against the tool drawing.

3. Printing — colour read against the Pantone standard under D65 light, not under workshop LEDs.

4. Fit — the case is mounted on the actual handset: button travel, port alignment and speaker clearance.

5. Drop — six faces at 1.2 m on concrete, inspected for corner cracking and print lifting.

6. Final — AQL 2.5 sampling before the carton is sealed.

 

A custom run is checked model by model, not by pulling one case off the top of the pile. If a single model fails the fit check, that model is held back and the rest of the order still ships — we do not hold the whole run hostage to one bad mould, and we do not quietly drop the problem model into the carton either.

 

What we will not do

 

We do not run custom logo orders below 1,000 pcs and call it a "trial". We do not re-sell a mould we built for one buyer to a second buyer. And we do not print a brand name onto a case we did not make, which is the request that gets a supplier into trouble with the brands its customers sell.

 

If your quantity is under 1,000 pcs for now, the honest route is to start with stock designs at 50 pcs, test which models sell, then place the custom run against the winners. That sequence costs less than guessing at 1,000 pcs of a model that does not move.

 

Send the model list and the artwork and we will come back with a unit price, a print recommendation and a ship date. If the artwork needs work before it can print, we will say that too, in the same reply.



Our Certification


Certifications.jpg


Positive Feedback from Customers 


feedback3.jpg    

Frequently Asked Questions (FAQs):

Q1: How to order?
A1: 

(1) contact us and tell us the products you'd like and the quantity.

(2) we'll offer you the best price and best shipping fee.

(3) you confirm the order.

(4) we send you invoice, then you pay it.

(5) we deliver the goods, then send you DHL or UPS tracking number.

(6) you receive the goods.


Q2: How long we can receive the goods?
A2:  We have fast lead time. All products are delivered. sually, we can deliver goods in 1-3days after payment. DHL cost 4-6days. UPS cost 6-7days. So, you can receive the goods in 5-8days after payment. 

Q3: What's your payment term?
A3: we accpet T/T(Bank Transfer), Western Union, PayPal..

Q4: What's your return policy?
A4: 
all 
of our products passed strict test before delivery. we make sure the quality is good.if you have found any quality problem in 30 days, please contact us and also send us pictures or videos, then we'll ask our product manager to check it. 

we can accept the 30-days return and send you replacemant if it's our quality problem. 

secury 3.jpeg





CLOSE