Manufacturer wholesale samsung galaxy note 2 tempered glass screen protector

Manufacturer wholesale for samsung galaxy note 2 tempered glass screen protector

1)    Surface hardness of 9H (with the hardest being 10H) keeps scratches non-existent

2)    Special coating that resists oily residue from staying on the screen 

3)    Thickness of 0.4/0.3mm allows you to maintain a slim and sleek profile 

4)    No air bubbles, easy to apply or remove, can be reused 

5)    Beveled edge keeps you safe from cracked & chipped edge

6)    More clearer visibility of your phone screen

7)    Smooth to touch, perefect fit for samsung galaxy note 2 screen

8)    China Manufacturer factory supplier wholesale, best tempered glass screen protector

1. Scratching / Crease Visual inspection Face up to items (hold it 20 cm away), it allows slight scratching and creasing but it can not hurts using layer.
2. Impurity / Smudginess Visual inspection it allows 10 pcs impurity of within ? 0.5mm, but its gap need to above 50mm Not obvious
3. Scratching/Fisheye Visual inspection it allows slight fisheye and scratching like slight rain. And works normal.
4. Stripe Visual inspection it allows a slight strip (without a obvious strip in the gap of 100mm)
  Rainbow stripe Visual inspection
The rainbow stripe is not obvious in the nature light (in the gap of 20 cm)
5. Anti-scratching B3 pencil Scratching to and fro with 20 times, and allow slight mark.
6. Transparency transmitivity test apparatus The transparency has to be 99% above.
7. Material bending calipers Test it whether distorted or not after material film molded. It allows the height of arch within 2mm on the base of 80mm width.
8. Stickness Mobilescreen High speed of emptying air. Hole site and fringe could stick firmly easily. It allows little air left
9. Release degree label it is good at releasing if it is easy to tear off after material film is shaped
10. Size Calipers/ tap the length of the whole material. Tear off other two layer film and measure the thickness of the using layer and the standard is 0.125cm¡À0.05
11. Evenness of pattern by both sides of whole material Glass The rim mold keeps to stick to glass firmly after 30 mins.

Detail picture for samsung galaxy note 2 screen protector: